MXR100030B 30KW fan cooling 3 phase ev charger rectifier module for ccs dc fast charging
The 30 kw ev charger rectifier module is a charging pile equipment module for DC fast charging of electric vehicles. By providing a maximum power output of 30 kW, it is able to quickly deliver energy to the battery system of an electric vehicle and enable high-speed charging. The charging module is typically equipped with charging interfaces that comply with charging standards, such as CHAdeMO and CCS, to ensure compatibility with different makes and models of electric vehicles.
-
Main Features
Ultra-wide output voltage range. 100~1000VDC.suitable for a wide range of EVs.
Ultra-high output power. in 300v-1000v output voltage,30kW constant power output;
Wide operating temperature range at full power -40℃-55℃.
Full load efficiency is higher than 95.5%—high efficiency in the whole working range, and more power saving.
Ultra-low noise enhances the user's charging experience.
The current in the low-voltage area does not shrink, and the charging speed is faster.Characteristic Curve
Application
It is suitable for DC chargers of different power levels. It can provide fast charging services for electric passenger cars, buses, logistics vehicles, engineering vehicles and other vehicles.
-
-
Input Current58A Max
-
AltitudeNo derating below 2000m,When the altitude is above 1000m, it needs to set the actual altitude value, the working temperature decreases by 1℃ for each additional 100 m
-
Input Voltage260-530Vac, three-phase + PE
-
Grid Frequency45-65Hz
-
Power Factor≥0.95(6kw≤output power≤15kw); ≥0.98(20kw≤output power≤40kw)
-
ITHD≤5%(15kw≤output power≤30kw)
-
Output Power30kw
-
Voltage Range100-1000Vdc
-
Current Range0-100A continuously regulated
-
Rated Current30A
-
Voltage stabilized accuracy≤±0.5%(100V-1000V,0~20MHz)
-
Current stabilized accuracy≤±1%(Output current 20% rated current~100% rated current value)
-
Current Sharing Imbalance≤±3%
-
Ripple Peak to Peak≤1%(voltage stabilization status, input voltage 323Vac~530Vac, output voltage 200Vdc~ 1000Vdc, output current 0~rated current)
-
Operating Temperatue-40℃～75℃, output derating above 55℃
-
Storage Temperature-40℃～+75℃
-
Relative Humidity≤95% RH without condensation
-
MTBF>500000 hours
-
Size(W×D×H)360×459×85mm
-
Weight≤20kg
-
Efficiency(full load)>95.5%
-
Cooling ModeFan cooling
-
Standby Power consumption13W+/-0.5W
-
Communication MethodCAN bus
-
Parallel Module Quantity≤60 pieces
-
IndicatorGreen: normal operation Yellow: alarm Red: fault
-
CertificationCE/TUV/EMC cTUVus
-
