MXR40050B 50kW ev fast charging ac dc power module
MXR40050B is a high-power AC/DC charging module specially designed for high-end charging scenarios of electric vehicles. Rated output power is 50 kw, and supports 260VAC~650VAC three-phase four-wire system (A/B/C +PE) input, the output voltage range is 0 ~ 400VDC, the maximum output current is 200 A, supports silent mode setting, in silent mode, the noise is less than 55dB.
-
Characteristic Curve
Key Features Low noise: support silent mode setting, provide multiple levels (55dB, 60dB) High protection: sensitive components are isolated from the air duct Ultra-high efficiency: >97% Ultra-high power density (40W/in³) Ultra-high reliability (MTBF>1,000,000h) Ultra-high power factor (0.99) Compatible with AC input and DC input Wide working temperature range: -40℃~+75℃ Wide input voltage range: 260VAC~650VAC Wide output current range: 0 ~ 200A Rated power: 50kW Support hot swap function With perfect intelligent protection function Support output back-feed isolation Support CAN bus communication and group setting Support LED digital tube display and button setting Meet the requirements of CE directives, EMI meets the CLASSB Limit -
-
Output Power50kW
-
Input Voltage260Vac～650Vac, three-phase + PE
-
Input Current<70A
-
Grid Frequency45-65Hz
-
Power Factor≥0.99(Load≥50%)
-
ITHD≤3%(Load≥50%)
-
Voltage Range0～400Vdc continuously adjustable
-
Current Range0~200A (continuously adjustable)
-
Voltage stabilized accuracy≤±0.3%
-
Current stabilized accuracy≤±0.3%
-
Ripple Peak to Peak≤0.3%
-
Operating Temperatue-40°C～60°C～75°C(Full power below 60°C, derated to 30% power at 75°C)
-
Storage Temperature-40℃～80℃
-
Relative Humidity≤95% RH without condensation
-
Altitude5000m
-
MTBF>100000 hours
-
Size(W×D×H)440×380×125mm
-
Weight<23kg
-
Efficiency(full load)>97%
-
Cooling ModeForced air cooling
-
Standby Power consumption<10W
-
Communication MethodCAN & RS485
-
Parallel Module Quantity≤60 pieces
-
IndicatorGreen: normal operation Yellow: alarm Red: fault LED digital tube
-
控件[tem_25_34]渲染出错,Source:未将对象引用设置到对象的实例。
控件[tem_25_34]渲染出错,Source:未将对象引用设置到对象的实例。
