MXR100050B-SE 50kw power converter inverter ac to dc ev charger fast charge module
-
Product introduction
The MXR100050B-SE is a high-power AC/DC charging module specially designed for high-end charging scenarios of electric vehicles. Rated output power is 50 kw, and supports 260VAC~650VAC three-phase four-wire system (A/B/C+PE) input, the output voltage range is 200VDC~1000VDC, the maximum output current is 167 A, supports silent mode setting, in silent mode, the noise is less than 55dB.
The charging module uses the isolated controller area network (CAN) communications port to communicate with the system monitoring module through the CAN protocol. The output voltage mode of the charging module can be set on the system monitoring module to perform voltage regulation, current limiting, and start-stop and other operations on the charging module.Characteristic Curve
Key Features
● Ultra-low noise: support silent mode setting, provide multiple levels (55dB, 60dB)
● High protection design, sensitive components are isolated from the air duct
● Wide working temperature range: -40℃~+75℃
● Wide input voltage range: 260VAC~650VAC
● Wide output voltage range: 200VDC~1000VDC
● Wide output constant power range: 300VDC~1000VDC@50kW
● Support hot swap function
● With perfect intelligent protection function
● Support output back-feed isolation
● Support CAN bus communication and group setting
● Support LED digital tube display and button setting
● Meet CE.EMI meets the CLASSB limit -
-
Output Power50kW
-
Input Voltage260–650 VAC
-
Input Current≤ 70 A
-
Power Factor≥0.99(Load≥50%)
-
ITHD≤5% (Load ratio ≥50%)
-
Voltage Range200-1000Vdc
-
Current RangeMaximum: 167 A
-
Rated Current50A
-
Voltage stabilized accuracy≤±0.3%
-
Current stabilized accuracy≤±0.3%
-
Current Sharing Imbalance≤3%
-
Operating Temperatue–40°C to +75°C (Output power derating at rated output voltage when the temperature is higher than 55°C.)
-
Storage Temperature-40℃～+75℃
-
Relative Humidity5%-95% RH ,Non-condensation
-
Altitude≤2000m（When altitude is above 2000m, derating is required)
-
MTBF>100000 hours
-
Size(W×D×H)440×380×125mm
-
Weight≤23kg
-
Efficiency(full load)>95.5%
-
Cooling ModeForced air cooling
-
Standby Power consumption≤13.5W
-
Communication MethodCAN
-
Parallel Module Quantity≤60 pieces
-
IndicatorGreen: normal operation Yellow: alarm Red: fault LED digital tube
-
